Skip to main content
Brentwood Air

Mini Split Systems in Brentwood: All Major Brands

Mini split installation with no major construction: one refrigerant line, one wall penetration, and a properly sized indoor unit.

Written Estimates
Upfront Pricing
Same-Day Available

Request Service Online

Book through the form, and the callback from Brentwood dispatch arrives shortly.

Consent is not a condition of purchase. Review our Privacy Policy and Terms of Service.

Upfront Price Before Work
Same-Day Service Available
Clean Work Area

What's Included

We pick head locations room by room, size each one to its own load, and route the line set down a wall or through a chase so it does not show from the street. A good fit for plaster-wall houses where new duct would mean opening ceilings.

No ductwork required
Multi-room installation
Energy-efficient inverter tech
Quiet outdoor units
Ideal for additions and ADUs
Smart remote control included

Why Choose Brentwood Air?

Experienced Technicians

Every visit is handled by an experienced HVAC tech

Same-Day Service

Quick response for urgent needs

Upfront Pricing

No hidden fees or surprise charges

System Tested With You

We run the system and walk you through the work

Mini Split Installation in Brentwood for Rooms Without Ducts

Ductless is the answer when a Brentwood house has no good path for duct: a converted garage, a rear guest house, a finished attic, an older home with plaster walls you would rather not open. Brentwood Air plans and installs the heads, the outdoor unit and the line between them.

Systems from Daikin and Mitsubishi are the ones we install. A single head cools one room. A multi-zone system serves several rooms from one outdoor unit, each with its own thermostat.

You can also use ductless beside a ducted system, to handle one room that never kept up.

A first visit also covers the question people forget: where the condensate drains and where the outdoor unit hums. A bedroom wall is a poor place for either, and we choose around that.

Because Brentwood houses range from flat-lot ranch homes to canyon estates, we look at where the outdoor unit can sit before we promise a head count. A sloped lot or a tight side yard changes the line run and the mounting, and we write that into the quote.

If an existing ductless system has stopped working, we will tell you whether a repair or a replacement head makes more sense.

What Sets the Price

There is no fixed price on this page. The quote is written before work starts, once we have seen the rooms and the wall the line has to cross.

ItemWhat moves it
Number of headsOne per room, or one per zone, each with its own capacity.
Outdoor unitSingle or multi-zone, and how much space and sound clearance the spot allows.
Line set lengthDistance and vertical rise from the outdoor unit to each head.
Wall and finish workCore drilling, line covers and condensate routing.
ElectricalDedicated circuit and disconnect for the outdoor unit.
PermitMechanical and electrical permit work through LADBS.

How the Visit and Install Go

We start with a walk through the rooms, then send the written quote.

  • Measure each room and choose head capacity.
  • Pick the outdoor unit spot with setback and sound in mind.
  • Mount heads, run the line set and drain, and seal the wall opening.
  • Evacuate, charge, test every head and set up the remote or app control.

Permits, Power and Controls

Brentwood falls under LADBS, which issues the permit for this work. Electric service here is LADWP. New split and heat pump systems use lower-GWP A2L refrigerants such as R-454B or R-32.

Heat pump mini splits also heat the room, so a head can replace a wall heater. Each head runs from its own remote or app control, and we can discuss a Smart Thermostat for the ducted side of the house.

Brentwood Air quotes the heads and outdoor unit by model, so you can compare cooling-only and heat pump versions before you choose.

Gas is not part of a ductless install. If the house also has a gas furnace, natural gas comes from SoCalGas and stays a separate line item.

Book a Room-by-Room Visit

Tell us the rooms and the walls, and we will confirm the layout in person. Call (877) 702-9609 and say which rooms need cooling.

Call (877) 702-9609

Ductless Mini Split by city

Open a city-specific page when you want this service tied to local neighborhoods, ZIP coverage, and the housing notes that shape the visit scope.

Browse all service areas

CA

Ductless Mini Split in Brentwood

Brentwood splits between flat streets of 1950s ranch homes running their original attic ductwork and canyon estates up Mandeville and Kenter where narrow winding road access decides how equipment arrives and in how many pieces. On the canyon lots the condenser sits on a cut pad below the living space with real vertical rise back to the air handler, while the ranch homes below usually need the supply trunk and return resized before new equipment can reach its rated airflow.

View local service

CA

Ductless Mini Split in Bel Air

Bel Air estates sit behind private gates on steep canyon lots, so equipment is often staged well below the house and walked up, and the condenser ends up benched into the slope a long way from the air handler. Those distances turn line set sizing and refrigerant charge into a calculated part of the design, while screening requirements and estate landscaping usually settle where the outdoor units can sit before anything else is decided.

View local service

CA

Ductless Mini Split in Santa Monica

Santa Monica's beach bungalows and Art Deco apartment buildings were built without ductwork or any mechanical space, so multi zone mini splits with a head in each room and the condenser on a roof or rear pad are the standard retrofit. Lots are tight and neighbors are close, so sound output and setback clearance around the outdoor unit usually decide placement well before line set length does.

View local service

CA

Ductless Mini Split in Westwood

Westwood's 1920s Spanish houses have plaster walls, tile roofs and nowhere to run a duct chase, so a compact ducted air handler in a borrowed closet or concealed ductless heads beats opening soffits through finished ceilings. The condominium and rental buildings answer to association rules on rooftop and balcony equipment, wall penetrations and permitted work hours, and those rules shape the installation more than the load calculation does.

View local service
Call (877) 702-9609